Home › Trades We Estimate › Drywall Estimating Services
CSI Division 09 · Georgia
Drywall Estimating Services in Georgia
Drywall, metal stud framing, ceilings and finishing estimates for Georgia drywall contractors and general contractors — board counts, studs and track, fire-rated assemblies and finish levels.
How do you estimate drywall?
A drywall estimate measures wall and ceiling surface area by assembly type, converts it into sheets by board size and type (regular, Type X, moisture-resistant), then adds metal studs and track, screws, tape, joint compound, corner bead, insulation (if in scope) and finishing labor by level (Level 1–5). Fire-rated and shaft wall assemblies are listed separately.
Overview
Board Counts, Framing and Finish Levels — Done Right
Drywall is a high-volume trade where small measurement errors multiply across floors and units. We measure each partition type from wall types and ceiling plans, including heights, soffits and bulkheads.
We estimate both residential hang-and-finish and commercial metal stud framing, rated assemblies, shaft walls and ACT ceilings.
Related: Painting Estimating Services, Insulation & Waterproofing Estimating and Lumber & Framing Estimating.
What's Included
- Wall & ceiling SF by assembly
- Sheets by size & type
- Metal studs & track
- Fire-rated & shaft walls
- Soffits & bulkheads
- Acoustical ceilings (ACT)
- Finish level & accessories
- Labor by assembly
Who It's For
Who Orders Drywall Estimating?
Drywall Contractors
Board and framing quantities for bids.
General Contractors
Division 09 interiors.
Multifamily Builders
Unit-by-unit drywall quantities.
Drywall Suppliers
Board and accessory quotes.
Scope
Drywall Work We Estimate
- Gypsum board walls
- Gypsum ceilings
- Metal stud framing
- Fire-rated partitions
- Shaft walls
- Sound-rated walls
- Moisture-resistant board
- Cement board
- Soffits & bulkheads
- ACT ceilings
- Specialty ceilings
- Level 4 & 5 finishes
- Corner bead & trims
- Insulation in partitions
Common Drywall Estimating Mistakes — and How We Avoid Them
Most lost margin in Drywall work comes from a handful of repeat mistakes. Our checklist-based takeoff and senior QA review are designed to catch them before your bid goes out:
- Using floor area instead of actual wall heights
- Missing soffits, bulkheads and furring
- Forgetting shaft walls and rated assemblies
- Ignoring finish-level requirements
- Underestimating stocking and hoisting labor
What to send for this estimate: floor plans, wall type legends, reflected ceiling plans and UL assemblies, plus addenda, the project address and your bid due date. If you want pricing with your own labor rates or supplier quotes, include those too — we’ll build them into the estimate. Send files through Contact Us.
Georgia Insight
Georgia Drywall Factors
Humidity
Moisture-resistant board is common in wet areas and humid conditions.
Multifamily volume
Metro Atlanta apartments require large, repetitive drywall packages.
Rated assemblies
Corridors and unit separations require UL assemblies.
Sound control
STC-rated walls between units add cost.
Labor demand
Finishers are in high demand in growth markets.
Stocking
High-rise stocking and hoisting add labor.
Cost Data
Indicative Georgia Drywall Costs
| Item | Indicative installed cost | Notes |
|---|---|---|
| Residential hang & finish | $2.00 – $3.50 / SF of board | Ceiling height and finish level |
| Commercial metal stud partition | $9 – $16 / SF of wall | Both sides board, framed |
| Acoustical ceiling (ACT) | $4 – $8 / SF | Grid and tile type |
Indicative ranges only.
Process
How Our Drywall Estimating Process Works
Simple, transparent and fast. Full detail on Our Estimating Process; fees on Estimating Pricing & Turnaround.
1. Send Plans
Upload drawings, specs and addenda, or share a cloud link with your deadline.
2. Fixed Quote
We confirm scope and send a fixed fee and delivery date — usually in one business day.
3. Takeoff & Pricing
Digital takeoff, then Georgia-adjusted labor, material and equipment pricing.
4. QA & Delivery
Senior estimator review, then Excel + PDF and marked-up plans delivered.
Related Services
Related Estimating Services
Subcontractor Estimating Services
Trade-specific estimates for subcontractors bidding Georgia GCs and owners.
Quantity Takeoff Services
Accurate, trade-by-trade quantities measured digitally from your plans and specifications.
Material Takeoff Services
Detailed material lists with quantities, sizes and waste factors for purchasing.
Bid Estimating Services
Bid-ready estimates that help contractors submit competitive, profitable numbers.
Why Georgia Cost Estimating
Why Georgia Clients Choose Us
Experienced estimators (Meet Our Estimators), documented data sources (Cost Data & Accuracy Methodology) and real sample files (Sample Estimates).
Georgia pricing
Unit rates adjusted for metro Atlanta, coastal and rural Georgia markets.
CSI MasterFormat
Organized by division so it drops into bid forms and lender budgets.
Two-estimator QA
A senior estimator checks every quantity, rate and total.
Confidential
Your plans and numbers are never shared. NDAs on request.
Service Areas
Drywall Estimating Services Across Georgia
We provide drywall estimating services statewide. Local pages for our 15 most active markets — or see all Georgia Service Areas.
Do you count sheets by size?
Yes — by board size and type.
Do you include metal studs?
Yes, studs and track by gauge and spacing.
Do you estimate ACT ceilings?
Yes, grid and tile by area.
Can you estimate rated walls?
Yes, by UL assembly.
How fast is delivery?
Most drywall estimates take 24–72 hours.
Our Location
Visit Our Atlanta Office
Georgia Cost Estimating
106 Mangum St SW, Atlanta, GA 30313, USA
- 1 (678) 745 8006
- ask@georgiacostestimating.com
- Monday – Friday, 8:00 AM – 6:00 PM ET
- Get directions on Google Maps
Based in downtown Atlanta, we serve residential, commercial and industrial projects across all of Georgia.
Get a quote for drywall estimating services
Email ask@georgiacostestimating.com, call 1 (678) 745 8006 or send plans through our contact page. Fixed-fee quote in one business day.